Мережеве сховище Qnap TL-D400S

Доставка зі складу 5-10 днів. 

TL-D400S JBOD storage enclosure allows you to back up and expand your QNAP NAS, Windows® and Ubuntu® computers and servers. The TL-D400S features four 3.5-inch SATA 6Gb/s drive bays and comes with a QXP PCIe card for connecting the enclosure using a SFF-8088 (or SFF-8644) cable. It provides reliable read/write performance for smooth storage and backup tasks.1. QNAP recommends following the standard procedure for connecting or disconnecting the TL-D400S. For more information, please see the TL-D400S user manual.2. The TL-D400S can only be used as an individual storage pool or volume on the NAS. Its storage pool or volume cannot be combined into the connected NAS. NAS applications cannot be installed on the TL-D400S.3. The TL-D400S only supports QNAP NAS running on QTS 4.4.2 (or above) or QTS hero operating system.Lockable hard drive trays prevent accidental drive removal.SFF-8088 (or SFF-8644) connection cable supports four SATA 6Gb/s channels per cable (24Gb/s in total) and provides faster data transfer speeds than eSATA and USB.Easy to use. QNAP NAS and PC can both use utility software to monitor, obtain, and manage JBOD information.High-performing TL SATA JBODThe TL SATA JBOD supports multi-lane SATA 6Gb/s transfer, and each SATA lane directly connects to a single SATA drive to help improve performance. With the 1-1 high-speed channel, the TL SATA JBOD delivers excellent transfer performance.Note: The SFF ports and drive slots order: SFF port 1 to HDD slot 1-4, SFF port 2 to HDD slot 5-8, SFF port 3 to HDD slot 9-12, SFF port 4 to SDD slot 1-4 (TL-D1600S)Flexible Storage Configuration and ManagementThe TL-D400S provides software-controlled storage configuration for greater management flexibility. You can configure RAID and monitor JBOD enclosure and disk health with Storage & Snapshots when connected to a QTS or QTS hero NAS, or with the QNAP JBOD Manager utility when connected to a computer.Use the Storage & Snapshots Manager in QTS or QTS hero to configure the TL-D400S as a storage enclosure for your QNAP NAS. The NAS expansion storage mode supports various NAS functions, including storage pools and snapshots. With TL-D400S, you can easily expand storage capacity.The QNAP JBOD Manager is a desktop utility for monitoring the TL-D400S on Windows® and Ubuntu® computers. You can quickly obtain disk statuses, JBOD information and health, view fan rotation speed, and check for firmware version updates.What you need to knowYou can connect your TL-D400S to Windows® and Ubuntu® computers through SFF-8088 (or SFF-8644) high-speed cable and use built-in utility to manage RAID configuration.Note:1. QXP series PCIe cards do not support Mac Pro.2. If there are any unexpected boot failures during QXP PCIe cards installation on the host, please check with the host manufacturing company for any new BIOS updates. Alternatively, you can try disabling the boot from the PCIe slot function or disable the external graphics card option.Intelligently Monitor JBOD Enclosure Status on PC and Servers with QNAP JBOD ManagerThe QNAP JBOD Manager is a desktop utility for monitoring the TL-D400S on Windows® and Ubuntu® computers. You can quickly obtain the disk statuses, JBOD information and health, view fan rotation speed, and check for firmware version updates. All device events are recorded, and will send desktop notifications when a system alert occurs.Notes:1. You can set up new software RAID groups in [Windows Storage Spaces] in Windows 8 (or later versions).2. Windows Server 2012 R2 (or later version) users can set up new software RAID groups in [Server Manager].3. Ubuntu 18.04 users need to pass commands into [mdadm] to set up new software RAID groups.4. Does not support macOS.Flexibly Expand Connectivity with QXP PCIe CardsInstall an exclusive QXP PCIe card onto your QNAP NAS, Windows® or Ubuntu® PC to connect the JBOD enclosure via SFF-8088 (or SFF-8644) cable , for easy and flexible storage expansion.Note:1. The TL-D400S package includes one QXP-400eS-A1164 card (can be purchased additionally) and one 1M SFF-8088 to SFF-8088 cable.2. A SATA JBOD storage enclosure can only connect to one NAS. Users can only use QNAP JBOD Manager to view statuses of devices and disks installed with QNAP expansion cards and JBODs. Users can only create single storage expansions when the QXP PCIe card is not connected to a TL SATA JBOD enclosure.3. TL SATA JBOD storage enclosure can install different QXP PCIe cards. For example, one NAS can be matched with multiple QXP PCIe cards to connect to TL SATA JBOD storage enclosure or users can use one QXP-800eS to expand two TL-D400S (there are no quantity limits except for restrictions mentioned in the previous note).4. Users of the TVS-871U-RP, TVS-1271U-RP, and x80 series NAS must update their BIOS to the minimum BIOS version. If not, unexpected boot failures might occur.SAS/SATA 6Gb/s external cables1-meter (3.28 ft.) SFF-8644 to SFF-8088 cable• For QXP-1600eS PCIe SATA card• Support SATA 6Gb/s and SAS 6Gb/s• Compatible with third-party SAS 6Gb/s JBOD productsOrder number: CAB-SAS10M-8644-8088-D011-meter (3.28 ft.) SFF-8088 to SFF-8088 cable• For QXP-400eS-A1164 and QXP-800eS-A1164 PCIe SATA cards• Support SATA 6Gb/s and SAS 6Gb/s• Compatible with third-party SAS 6Gb/s JBOD products*Order number: CAB-SAS10M-8088-D01Versatile usage scenarios to meet storage expansion needsThe TL-D400S meets many storage expansion requirements for the home and office. Below is a list of potential application scenarios:Scenario 1: Expand your NAS capacityThe TL-D400S provides an alternative method for users to expand their NAS storage capacity. By connecting the TL-D400S to their NAS and using Storage & Snapshots Manager in QTS or QTS hero, users can easily configure and manage their storage expansion. The TL-D400S supports a variety of QNAP NAS storage and file management functions, allowing users to build storage pools, finding files with Qsirch, and organizing files with Qfiling.Function QNAP TL-D400S QNAP TR-004 UX-500P Other external RAID/ JBOD deviceConnection Type SATA USB 3.2 Gen 1 USB 3.2 Gen 1 By deviceDrive bays 4 4 5 By deviceSupported systems QNAP QTS/QTS hero, Windows, Linux etc... QNAP QTS/QTS hero, Windows, Linux etc... QNAP QTS/QTS hero QNAP QTS/QTS hero, Windows, Linux etc...Disk health monitoring Supported (QNAP QTS/QTS hero, Windows, inux) Supported (QNAP QTS/QTS hero, Windows) Supported Not SupportedHardware RAID protection Not Supported Supported (QNAP QTS/QTS hero, Windows) Not Supported Varies by deviceCreate Storage Pool Supported(QNAP QTS) Supported(QNAP QTS) Supported Not SupportedRAID migration, capacity expansion Supported (QNAP QTS/QTS hero, Windows, Linux) Not Supported Supported Varies by deviceNote:1. The TL-D400S does not support QNAP NAS models that cannot be updated to QTS 4.4.2 (or later) and the following NAS models: TS-128, TS-228, TS-131, TS-231, TS-431, TS-431U.2. Drives can only be migrated from one TL USB JBOD to another TL USB JBOD. Files and data stored on drives migrated to or from other JBOD devices will not be recognized.Scenario 2: External storage for your NASYou can use the TL-D400S to expand your NAS storage. You can select disks to create storage pools for expanding your NAS capacity, or you can treat each disk as an individual external storage space and use it as a removable drive for greater flexibility. Regardless of the mode you use, you can always use Storage & Snapshots Manager in QTS or QTS hero to set up and manage your TL-D400S and use hard drive S.M.A.R.T. and Notification Center to check disk status anytime and anywhere.Mode 1: Expand NAS capacity by storage pool modeYou can use Storage & Snapshots Manager in QTS or QTS hero to configure the RAID storage pool for your TL-D400S and expand NAS capacity.Note: The TL-D400S can only be used as an individual storage pool or volume on the NAS. Its storage pool or volume cannot be combined into the connected NAS. NAS applications cannot be installed on the TL-D400S.Mode 2: Expand your NAS by external storage modeYou can treat each disk on your TL-D400S as an individual storage space and expand your NAS capacity. For example, it will show 8 independent external disks on an 8-bay NAS.Note: The TL-D400S supports multiple disk formats, including NTFS (for Windows), HFS+ (for Mac), EXT4 (for Ubuntu or QNAP NAS), exFAT (for Windows, Mac, Ubuntu, and QNAP NAS) etc.Scenario 3: Expand the storage space of your Windows® and Ubuntu® computersYou can use your TL-D400S to expand the storage space of Windows® and Ubuntu® computers. You can set up the RAID configuration of your TL-D400S to further secure data protection. Moreover, you can also use the single disk mode and format with exFAT file system for more convenient access and sharing of files between Windows® and Ubuntu® computers.Note:1. The QNAP JBOD Manager supports Windows 8 (or later versions), Windows Server 2012 R2 (or later versions), Ubuntu 18.04 (or later versions).2. Because Windows® and Ubuntu® operating systems are incompatible, the TL-D400S does not support cross-platform sharing after the RAID configuration setup.Mode 1: RAID configuration modeYou can obtain data protection by building a software RAID 0, RAID 1, and RAID 5 volume with native utility in your Windows® and Ubuntu® computers, and use the QNAP JBOD Manager to monitor the TL-D400S status information.Mode 2: Single disk modeYou can format hard drives with the exFAT file system while accessing and sharing files between Windows® and Ubuntu® computers.Note: Your QNAP NAS can also use the exFAT file system by buying the exFAT driver license from QNAP Software Store.Scenario 4: Third-party hardware RAID card for advanced protectionYou can install third-party hardware RAID cards on your TL-D400S for advanced hardware RAID 1, RAID 5, RAID 6, RAID 10, RAID 50, and RAID 60 protection and use Windows® utility software to manage your TL-D400S.Note: The third-party hardware RAID card cannot be used simultaneously with QNAP JBOD manager and QXP series PCIe cards.TL-D400S Offers Better Performance Than Other USB and eSATA JBOD SolutionsThe TL-D400S features SFF-8088 (or SFF-8644) connectivity and multiple SATA 6Gb/s bays. This provides better sequential read performance and faster data transfer speeds than existing USB and eSATA expansion enclosures, while also being a more economical option compared to a QNAP REXP SAS enclosure.Sequential ThroughputWindows RAID 0TL-D400S: Read 1556 MB/sTL-D400S: Write 1550 MB/sWindows RAID 5TL-D400S: Read 1513 MB/sTL-D400S: Write 342 MB/sUbuntu RAID 0TL-D400S: Read 1647 MB/sTL-D400S: Write 1545 MB/sUbuntu RAID 5TL-D400S: Read 1470 MB/sTL-D400S: Write 953 MB/sQTS RAID 0TL-D400S: Read 1709 MB/sTL-D400S: Write 1660 MB/sQTS RAID 5TL-D400S: Read 1704 MB/sTL-D400S: Write 1245 MB/sTested in QNAP Labs. Figures may vary by environment.Test environment:JBOD model: TL-D400SVolume type: Samsung SSD 860 Pro 512GBNAS: TS-983XU, Intel Xeon E-2124 3.3GHz, 4GB RAM, QNAP QXP-400eS, QTS 4.4.2Client PC:Windows: Intel Core i5-8400T 1.7GHz, 16GB RAM, QNAP QXP-400eS, Windows 10 ProUbuntu: Intel Core i5-8400T 1.7GHz, 16GB RAM, QNAP QXP-400eS, Ubuntu 18.04 DesktopExtend hardware warranty up to 5 yearsThe TL-D400S is backed by a 2-year warranty at no additional costs. You can purchase a warranty extension that extends your warranty coverage up to 5 years.Drive Bay 4 x 3.5-inch SATA 6Gb/s, 3Gb/sAudio Alert On/Off Switch Form Factor TowerHost Interface 1 x SFF-8088LED Indicators HDD 1-4, Status, Link, Fan errorButtons Power switchWeight (Net) 3.66 kgMax. number of HDDs/SSDs supported 4 x 3.5-inch SATA 6Gb/sHard Drive Type 3.5-inch SATA hard disk drives2.5-inch SATA hard disk drives2.5-inch SATA solid state drivesOperating temperature 0 - 40 °C (32°F - 104°F)Relative Humidity 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)Power Supply Unit 65W adapter, 100 - 240VPower Consumption: Operating Mode, Typical 22.985 WWith Seagate ST6000NM0024 fully polulatedFan Mode Switch (Auto, high, medium, low)Fan 1 x 120mm, 12VDCSound Level 20.1 db(A)System Warning BuzzerKensington Security Slot Supported O.S.QNAP QTS / QTS hero, Windows, LinuxQTS / QTS hero QTS 4.4.2 / QTS hero h4.5.0 (or newer)QTS QTS drive monitoring and storage pool supportQTS advanced drive features such as bad block scan, Erase,Performance Test, Seagate Ironwolf IHMRAID migrated & expandedUtility for other platform QNAP JBOD ManagerWindows: Win8 or nerwer / Server2012 R2 or newerLinux:Ubuntu 18.04Device Info(Health/Bus type/PSU/Temperature/FAN)Gwarancja: Producenta (24m)